 |
 |
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
NEWS
madCAM 4.0 for Rhino 4.0 is shipping
Sweden, March 01 2007, madCAM has announced that madCAM 4.0 is shipping.
New features in madCAM 4.0
Here is a short presentation of some of the new features in madCAM 4.0
Download madCAM 4.0
Automatic Remachining
Video
The remachining is calculated from the true stock model. It works for Z-level finishing
and Planar finishing. It is possible to do remachining with any cutter in
madCAM, Ball end, Flat End, Corner End and Taper Mill.
Taper Mill option
It is now possible to use taper cutters in madCAM.
Z-level finishing Smooth Corners option
New option for sharp or smooth corners for Z-level finishing. If the cutter
can't reach corners on the model due to cutter size, it will normally produce
sharp corners on the toolpath. The smooth corners option will create fillets
at those corners and make it smooth even when cutting those areas.
Planar
finishing Blend option
New option for blending when joining the toolpath curves for
Planar finishing. This makes a smoother motion when
cutting.
| madCAM | |
| Phone: |
+46 498 - 47 10 11 |
| Fax: | +46 498 - 47 10 16 |
| E-mail: | info@madcamcnc.com |
| Address: | Lokstallsgatan 4, |
| 620 23 Romakloster | |
| Sweden | |